Polymer: OctoPrint 3D Printing4.1 - App Store

(Formerly known as OctoClient for OctoPrint.)

Polymer is the simplest way to manage a 3D printer, right from your mobile device. It works with any 3D printer with OctoPrint. You can start and monitor prints from anywhere*, and manage your printer with its advanced controls. It is built to be at home on iOS, sporting a beautiful, intuitive design.

Here's what some users have to say:
- "Works great. Love it. Wouldn’t own a 3D printer without it."
- "Simple, straightforward, works like a charm."
- "Must have for any 3D printer owner!"

Extended feature list:
MONITOR YOUR PRINTS
------------------------
. Live camera streaming: watch your print progress remotely.
. Status monitoring: view the print completion, heater temperatures, time elapsed and estimated time remaining.
. GCODE view (iPad only): follow your printer's moves as the print progresses.
CONTROL YOUR PRINTER
--------------------
. Start, stop, and pause prints
. Home axes
. Set heater temperatures
. Extrude and retract filament
. Set fan speeds
. Set feed and flow rates
. Disable motors
. Multiple printer support
. Add your own custom commands
. Send and receive GCODE command messages to your printer
. Use OctoPrint system commands
. Control your printer's power supply

FILE MANAGEMENT
--------------------
. File viewer: view all your files and folders. See analysis results for your models (such as estimated print time), and view their print history
. Create folders
. Upload files to OctoPrint or your printer SD card
REMOTE ACCESS
------------------
. Integration with the OctoEverywhere service for hassle-free, secure, remote access.

-------------
* Using Polymer outside your local network requires configuring a remote access method. See polymer3d.app/remote for setup guides.

This is an independent app that is neither affiliated with nor endorsed by the OctoPrint project or its creator. OctoPrint is a registered trademark owned by Gina Häußge.

Version History - Removed Polymer Pro. All features are now available for free. Thank you for using Polymer.
- Added support for Liquid Glass 4.1 Apr 27 – Polished a bunch of small interface components
– Made the GCODE command editor auto-resizing
– Fixed a bug with editing custom GCODE commands 4.0.10 07/05/2022 – Small bug fixes 4.0.9 06/26/2022 – Fixed a bug where GCODE files with percent symbols in the filename would not display slicer thumbnails
– Fixed a bug where the app would re-prompt for setup on each launch in some circumstances 4.0.8 04/11/2022 – Adds support for remote access through The Spaghetti Detective 4.0.7 02/04/2022 – Added support for Slicer thumbnails in the Files tab (requires the Slicer Thumbnails OctoPrint plugin and a compatible slicer configuration)
– Added support for sharing webcam snapshots
– Added support for sharing OctoEverywhere live links
– Added support API-less authentication through OctoEverywhere
– Polymer now keeps the screen awake in full-screen webcam mode
– Miscellaneous bug fixes 4.0.6 01/26/2022 – Fixed a bug where the file information screen would not display on iOS 15.1 4.0.5 12/29/2021 – Swapped 'Set' and close buttons on the temperature set screen for a more natural positioning (#11)
- Fixed a bug where the app would fail to connect in certain circumstances. (Please note that version 4 changed how the Polymer connects to OctoPrint, which some proxy misconfigurations break. If you're having trouble using your remote access option, email me)
– Improved diagnostic logging 4.0.4 08/08/2021 – Added a link to Polymer's new feature requests forum. Over at feedback.polymer3d.app, you can submit and vote on feature requests. I'd love to hear your suggestions!
– At initial set-up, you can now set up just an OctoEverywhere printer connection without a corresponding local connection

——
New in 4.0:

Polymer is here — OctoClient has a new name and a fresh coat of paint, and heaps of new features:

– Brand-new design! The app has a new look, closely following iOS design conventions. There's now great landscape mode support on iPad and support for dark mode.
– Vastly improved printer setup. Polymer will now automatically find OctoPrint servers on your network, and then automatically authenticate with them. All you need to do is approve it in OctoPrint—no more fumbling around with API keys!
– Added a 'quick-switch' menu to the status and control screens
– Added a GCODE viewer (presently iPad only). The GCODE viewer shows the live status of your print job as it completes.
– Added file upload (Pro)
– Added a full-featured printer connection screen. You can configure the serial port, baud rate, and profile for your serial connection.
– Added a new file information screen. You can view stats about any of your GCODE files, or download them to your device.
– Added OctoEverywhere integration
– Added temperature controls to the status screen
– Added feed rate and flow rate controls
– Added stepper disabling buttons
– Added support for the PSU control plugin 4.0.3 07/31/2021 – Fixed a bug where webcam URLs containing spaces would not stream (thanks Phil)
– Added an option to remove duplicate printer connections (thanks Richard)

——
New in 4.0:

Polymer is here — OctoClient has a new name and a fresh coat of paint, and heaps of new features:

– Brand-new design! The app has a new look, closely following iOS design conventions. There's now great landscape mode support on iPad and support for dark mode.
– Vastly improved printer setup. Polymer will now automatically find OctoPrint servers on your network, and then automatically authenticate with them. All you need to do is approve it in OctoPrint—no more fumbling around with API keys!
– Added a 'quick-switch' menu to the status and control screens
– Added a GCODE viewer (presently iPad only). The GCODE viewer shows the live status of your print job as it completes.
– Added file upload (Pro)
– Added a full-featured printer connection screen. You can configure the serial port, baud rate, and profile for your serial connection.
– Added a new file information screen. You can view stats about any of your GCODE files, or download them to your device.
– Added OctoEverywhere integration
– Added temperature controls to the status screen
– Added feed rate and flow rate controls
– Added stepper disabling buttons
– Added support for the PSU control plugin 4.0.2 07/28/2021 – Added support for the ‘Smart Filament Sensor’ plugin (thanks Ash for the suggestion)
– Fixed a bug with the first-launch news view

——
New in 4.0:

Polymer is here — OctoClient has a new name and a fresh coat of paint, and heaps of new features:

– Brand-new design! The app has a new look, closely following iOS design conventions. There's now great landscape mode support on iPad and support for dark mode.
– Vastly improved printer setup. Polymer will now automatically find OctoPrint servers on your network, and then automatically authenticate with them. All you need to do is approve it in OctoPrint—no more fumbling around with API keys!
– Added a 'quick-switch' menu to the status and control screens
– Added a GCODE viewer (presently iPad only). The GCODE viewer shows the live status of your print job as it completes.
– Added file upload (Pro)
– Added a full-featured printer connection screen. You can configure the serial port, baud rate, and profile for your serial connection.
– Added a new file information screen. You can view stats about any of your GCODE files, or download them to your device.
– Added OctoEverywhere integration
– Added temperature controls to the status screen
– Added feed rate and flow rate controls
– Added stepper disabling buttons
– Added support for the PSU control plugin 4.0.1 07/26/2021 Polymer is here — OctoClient has a new name and a fresh coat of paint, and heaps of new features:

– Brand-new design! The app has a new look, closely following iOS design conventions. There's now great landscape mode support on iPad and support for dark mode.
– Vastly improved printer setup. Polymer will now automatically find OctoPrint servers on your network, and then automatically authenticate with them. All you need to do is approve it in OctoPrint—no more fumbling around with API keys!
– Added a 'quick-switch' menu to the status and control screens
– Added a GCODE viewer (presently iPad only). The GCODE viewer shows the live status of your print job as it completes.
– Added file upload (Pro)
– Added a full-featured printer connection screen. You can configure the serial port, baud rate, and profile for your serial connection.
– Added a new file information screen. You can view stats about any of your GCODE files, or download them to your device.
– Added OctoEverywhere integration
– Added temperature controls to the status screen
– Added feed rate and flow rate controls
– Added stepper disabling buttons
– Added support for the PSU control plugin 4.0 07/24/2021 – Fixed a visual bug with the temperature control interface

——
OctoClient 4—bringing a new design, first-class iPad support, and much more—is now in public beta! Sign up at octoclient.com/beta 3.1.5 03/09/2021 – Fixed a bug where Terminal would sometimes not work with HTTP Basic Auth

——
OctoClient 4—bringing a new design, first-class iPad support, and much more—is now in public beta! Sign up at octoclient.com/beta 3.1.4 03/05/2021 – Updated and simplified privacy policy
– Added prompt for attaching app diagnostics to support emails 3.1.3 12/17/2020 – Fixed a bug where camera settings would not update after switching printers (thanks Garret & Matt)
– Fixed a bug where the full-screen webcam could cause the app to become stuck in landscape mode (thanks Jasper)
– Added an option to disable full-screen webcam auto-rotation to landscape mode (thanks Magnus) 3.1.2 11/24/2020 Just a couple of fixes:
– Terminal input is capitalised by default to avoid issues with case-sensitive printer firmwares (thanks Reed)
– Fixed a bug causing multi-line GCODE commands to not be sent (thanks Fabiano) 3.1.1 08/09/2020 I'm still hard at work on the next major version of OctoClient, but for now here's some fixes and 
– Improved iOS 13 support
– Fixed an issue where when switching printers, the old printer's files would still be displayed until manually refreshed (thanks Mike)
– Fixed an issue where the terminal would not work in certain circumstances (thanks James)
– Fixed an issue where some custom system commands could not be triggered (thanks Andre and Sébastien)
– Fixed some issues with printing from SD cards
– SD card file loading now works properly
– Added multi-line GCODE command buttons
– The files sort option is now persistent across relaunches 3.1 07/07/2020 - iOS 12.1 Support
- Added a crash reporter, you can opt-in to crash reporting in settings 3.0.4 11/26/2018 - Fixed a bug that could cause the app to abort when searching in the files tab
- Miscellaneous performance optimisations 3.0.3 10/14/2018 Happy iOS 12 day! This version brings support for iOS 12 and new iPhones. 3.0.2 09/17/2018 - Bug Fixes
- Fixed crash from hostname misconfiguration
- Added option to keep controls enabled while printing
- Re-added privacy policy (octoclient.com/privacy)
-----
Coming (very) soon: push notifications! If you'd like to help test notifications, sign up at https://octoclient.com/beta 3.0.1 09/08/2018 OctoClient 3 is finally here! It brings a bunch of updates, bug fixes and a fresh design:

New:
- New design
- Support for dual extruder printers
- Improved streaming engine
- In-app help documentation
- Many performance improvements
- The usual bug fixes

New in Pro:
- Custom GCODE command buttons: assign your own commands to buttons in the control tab
- OctoPrint System Menu support: trigger both system commands and custom commands from OctoPrint plugins
- GCODE Terminal: Send and receive GCODE commands from your printer
- Pinch-to-zoom in the fullscreen webcam view
Thank you all for your support, especially Pro users, you help keep development of this app going! 3.0 08/06/2018 - New, faster streaming engine that fixes some webcam stream bugs 2.1.7 07/14/2018 - Fixes a crash when using Basic Auth under some circumstances 2.1.6 07/06/2018